Evacuated Tube Collectors
FORCED CIRCULATION SYSTEMS - NON-PRESSURIZED
OPEN-LOOP-COLLECTORS for water heating
Pipe material: Copper
Scope of delivery: Fully pre-assembled unit comprising
- Evacuated tubes based on the thermos flask principle
- Tail stock
- Low maintenance and repair requirements
- Quick and easy installation due to complete pre-assembled components and manageable sizes
- Short amortisation rate
- Wide-ranging application areas
- Customizing: Development of customer-specific modifications and individual solutions by request
SPECIFICATION
| Series | |||||
|---|---|---|---|---|---|
| Type/specification | LP C47-1550 | LP C47-1570 | LP C58-1830 | LP C58-1860 | |
| Inner tank | material/mm/mm | SUS304-2B/0.6/70x70* | SUS304-2B/0.6/70x70* | SUS304-2B/0.6/75x80* | SUS304-2B/0.6/75x80* |
| Outer tank | material/mm | Matte stainless steel 201/0.41** | Matte stainless steel 201/0.41** | Matte stainless steel 201/0.41** | Matte stainless steel 201/0.41** |
| Inlet & outlet dimension | mm | 1"(Inner diameter 25, outer diameter: 33.2) | 1"(Inner diameter 25, outer diameter: 33.2) | 1"(Inner diameter 25, outer diameter: 33.2) | 1"(Inner diameter 25, outer diameter: 33.2) |
| Side and bottom frames | Aluminium alloy 6063 | Aluminium alloy 6063 | Aluminium alloy 6063 | Aluminium alloy 6063 | |
| Manifold & frames | mm | 1950x550x370 (5 pcs/carton) | 2600x550x370 (5 pcs/carton) | 2850x540x360 (5 pcs/carton) | 2850x540x360 (5 pcs/carton) |
| Evauated tube | mm | Three target tubes Ø 47x1500 | Three target tubes Ø 47x1500 | Three target tubes Ø 47x1500 | Three target tubes Ø 47x1500 |
| Gap between the tubes | mm | 70 | 70 | 80 | 80 |
| Tubes | no. | 50/Horizontal | 70/Horizontal | 30/Horizontal | 60/Horizontal |
| Evacuated tubes (separately packed) | mm | 1580x280x200 (15 pcs/carton) | 1580x280x200 (15 pcs/carton) | 1880x350x170 (10 pcs/carton) | 1880x350x170 (10 pcs/carton) |
| Max. working pressure burden bar | mm | 1580x280x200 (15 pcs/carton) | 1580x280x200 (15 pcs/carton) | 1880x350x170 (10 pcs/carton) | 1880x350x170 (10 pcs/carton) |
| Max. working pressure burden bar | MPa | 0.05 | 0.05 | 0.05 | 0.05 |
| Max. stagnation temperature | ºC | 95 | 95 | 95 | 95 |
| Qty | 20,40 GP/40 HC | 70, 150/165 pc | 50, 105/125 pc | 60, 120/140 pc | 35, 70/80 pc |
*(length x height) square: Compared with traditional round shaped inner tank, the square shaped inner tank ensures same thickness of insulation in the whole manifold. Additionally, our inner tank is thin in order to promote and expedite the natural flow rate for efficient heat transfer.
** No visible dirt due to the matte stainless steel 201
THE KEY COMPONENTS ARE IMPORTED FROM LINUO-RITTER AND MANUFACTURED IN INDIA BY TAYLORMADE SOLAR UNDER THE BRAND NAME OF LINUO-TAYLORMADE